Sort by:
53 products
53 products
Honigum-Heavy was specially developed for all two-phase impression techniques, and, among other things, this material stands out with its exceptionally high final hardness. Thanks to its good fixation ability the noted Brånemark Center recommends Honigum-Heavy specifically for implant impressions.
Instructions for use
Packing:
5 x 380ml Cartridge
50 x MixStar-Tips
Honigum-Heavy
-
Extremely high hardness
Honigum-Heavy exhibits easy cutting characteristics for providing pressure relief channels in corrective treatments.
These are necessary in order to obtain an optimal detail reproduction with the secondary impression.
Especially for implant impressions Honigum-Heavy exhibits good fixation and torsion-preventing characteristics.
For combined treatments with implants and prepared teeth double mixing impressions with Honigum-Light are recommended. For implant treatments Honigum-Heavy should be used as a mono-phase impression material.
Good resistance
With the double mixing impressions Honigum-Heavy exhibits a good stability in the tray and optimal resistance when positioned. The light-bodied material Honigum-Light thus penetrates into the subgingival areas.
Whether correction impressions or double mixing technique: Impressions with Honigum-Heavy result in fitting restorations.
- Exceptionally high final hardness
- Optimal resistance when positioned
- Excellent fixation characteristics
- Trouble-free and safe removal
- Invariably homogeneous, bubble-free material quality -
-
Honigum-Mono was specially developed for mono-phase technique to facilitate high precision impressions in only one step.
Packing:
1x380ml & 10 MixStar Tips White
-
- Precision in just a single step
- Precise reproduction of the preparation line
- Finest surface details
- Lower final hardness
- Good hydrophilicity -
-
Honigum-Mono was specially developed for mono-phase technique to facilitate high precision impressions in only one step.
Packing:
5x380ml & 50 MixStar Tips White
-
- Precision in just a single step
- Precise reproduction of the preparation line
- Finest surface details
- Lower final hardness
- Good hydrophilicity -
-
Honigum-Heavy was specially developed for all two-phase impression techniques, and, among other things, this material stands out with its exceptionally high final hardness. Thanks to its good fixation ability the noted Brånemark Center recommends Honigum-Heavy specifically for implant impressions.
Instructions for use
Packing:
8 x 50ml Cartridges
16 x Automix-Tips
Honigum-Heavy
-
Extremely high hardness
Honigum-Heavy exhibits easy cutting characteristics for providing pressure relief channels in corrective treatments.
These are necessary in order to obtain an optimal detail reproduction with the secondary impression.
Especially for implant impressions Honigum-Heavy exhibits good fixation and torsion-preventing characteristics.
For combined treatments with implants and prepared teeth double mixing impressions with Honigum-Light are recommended. For implant treatments Honigum-Heavy should be used as a mono-phase impression material.
Good resistance
With the double mixing impressions Honigum-Heavy exhibits a good stability in the tray and optimal resistance when positioned. The light-bodied material Honigum-Light thus penetrates into the subgingival areas.
Whether correction impressions or double mixing technique: Impressions with Honigum-Heavy result in fitting restorations.
- Exceptionally high final hardness
- Optimal resistance when positioned
- Excellent fixation characteristics
- Trouble-free and safe removal
- Invariably homogeneous, bubble-free material quality -
-
- Outstanding flow properties Instructions for use
- Extraordinary stability
- Balanced hydrophilicity
- Registers even the finest details
Packing:
8 x 50ml Cartridges
50 x Automix-Tips
50 x Intraoral-Tips
Honigum-Light
-
High precision correction-impression material
Honigum-Light is an innovative correction-impression material combining excellent flow properties with exceptional stability.
As a light-bodied material Honigum-Light is well suited for correction and double mixing impressions and can be combined with Honigum-Heavy or the Honigum-Putty materials.
For its superior product characteristics Honigum received the best »clinical ratings« of all tested VPS materials from the noted »The Dental Advisor«.*
*Elastomeric Impression Materials. The Dental Advisor 2006; 23 (3): 1-7.
DMG-developed cleverness: the rheologically active matrix
The rheologically active matrix allows for flexible behavior in a material’s viscosity. That means: To be stable or flowable depending on the situation. Honigum-Light offers this capacity in an unique manner.
Outstanding stability in the tray and intraorally
At low shear stress Honigum-Light exhibits significantly higher values as competitive materials (see graphic) thus proving its high stability. The material remains at the area where it was applied without running or dripping.
Low shear stress
= high viscosity
= extraordinary stability
Outstanding flow properties
Under shear stress (e. g. when inserting the tray into the mouth) the viscosity properties change and Honigum-Light overcomes the alleged opposites: the initially stable material flows below the preparation line and thus provides a perfect detail reproduction
High shear stress
= low viscosity
= outstanding flow properties
This quantum leap in the union of seemingly incompatible property profiles – exceptional stability and extreme flowability – is illustrated in the two graphics*.
*C. Luu, and C. Angeletakis, Kerr Corporation, Orange, CA, USA, Shear Thinning Behavior of Silicone Impression Materials, Poster#1849, IADR Honolulu, Hawaii, 2004. -
-
- Precision in just a single step
- Precise reproduction of the preparation line
- Finest surface details
- Lower final hardness
- Good hydrophilicity
Packing:
2 x 50ml Cartridges
4 x Automix-Tips
4 x Intraoral-Tips
Easy fixation and perfect-fit hard relining: When it comes to perfectly fitting prostheses, LuxaPick-up makes the work much easier.
Packing:
1 Cartridge @ 76 g
15 Automix Tips Blue 10:1
Brochure
LuxaPick-up
Instructions for Use
LuxaPick-up
-
- Direct, hard relining For perfect-fit prostheses
- Fixing of secondary parts and connection elements In implant-supported prostheses
- Particularly bio-compatible: no MMA, no peroxide
- Tension-free, reliable fit, no time delay
- One of the hardest VPS-based bite registration materials Instructions for use
- Superior break restistance
- Fresh fruity orange scent
- Minimal bite resistance
- Fast-curing
Packing:
2 x 50ml Cartridges
12 x Automix-Tips
O-Bite
-
Maximum final hardness
With a Shore-A-hardness of 93.3, O-Bite is the hardest of all VPS-based bite registration materials. The material’s high final hardness is, particularly important for repositioning the bite registration on the models in the articulator in order to guarantee perfectly fitting restorations.
Softer silicones flex or compress, thus prohibiting a precise articulation. This can lead to unwanted bite elevations requiring a time-consuming grinding process. A direct insertion of an elevated restoration may cause significant discomfort in the mandibular joint.
With its superior hardness O-Bite ensures a gnathologically perfect tooth relationship.
Excellent break resistance
Thanks to its DMG-developed vinyl silicone matrix, O-Bite exhibits outstanding break resistance. The linking structure of the VPS material is achieved through silicone chains of equal length which facilitate a particularly stable linking structure when cured. For the application this characteristic guarantees high break resistance during removal, cutting and repositioning on the model. -
-