Super-Snap X-TREME Standard disk kit with 50 pcs each of red and green X-TREME standard disks while the X-TREME Mini-Disk kit contains 50 pcs each of red and green X-TREME mini disks.
Packing:
1/Kit
-
Benefits:
- Specific abrasive grits used for each of the 3 co-ordinated polishing steps
- Abrasive grains and binder are perfectly matched
- High gloss polishing without the need of additional, messy polishing paste
-Low vibration and minimal heat generation
Indications:
Available in 3 differeent grits HP Shanks only:
Coarse (dark grey) - for adjusting
Medium (brown) - for finishing and pre-polishing
Fine (light grey) - for polishing -
Super-Snap X-TREME Standard Disk Kit [PN 0506] Contains:
- Super-Snap X-TREME Standard Green & Red Disks x 50 -
Recommened Speed Range : 10000-12000 rpm/ Max 15000 rpm
Contact Pressure: 0.3-0.6 N
Usage Note: Dry
An assortment of Brownie, Greenie and Supergreenie points for polishing precious and semi-precious metal alloys to a high-lustre.
Packing:
1/Kit
-
The Kit HP [PN0303] contains:
- Brownie KN7, WH6 & PC2 x 2 each (for pre-polishing)
- Greenie KN7, WH6 & PC2 (for polishing)
- Supergreenie KN7, WH6 & PC2 (for super polishing)
Specially selected assortment of white stones and porcelain polishers for chair-side adjustment and glazed like polishing of porcelain restorations prior to placement without the tedious refiring process.
Packing:
1/Kit
-
The Kit [PN 0301] contains:
Dura White Stones HP
- 1 each CN1, FL3 & RE1 for adjusting & finishing
Ceramiste Points HP
- 1 each KN7, PC2 & WH6 in Standard, Ultra & Ultra II grits for polishing
A reliable range of carbide burs in different shapes with various flute designs to suit a variety of applications such as fast chair-side or bench side application on removal prostheses.
Packing:
1/Case
-
Benefits:
- High-grade tungsten carbide burs are developed to provide enhanced cutting efficiency with remarkable durability
- Uniform concentricity assures minimal vibration and precise trimming/ adjustment of either acrylic resin or cast metal
- Available in 6 different types of cutting surfaces and a total of 29 shapes:
Coarse (C) – for gross reduction of plaster
Normal Coarse (NC), Normal Cross Cut (N) & Basic Plain Cut (B) – for trimming and initial finishing
Normal Fine Cut (NF) & Diamond Fine Cut (DF) – for anatomical contouring and finishing
Indications:
Developed for efficient adjustment of acrylic resins, nickel-chrome cobalt alloys, chrome-nickel alloys and precious alloys.
A reliable range of carbide burs in different shapes with various flute designs to suit a variety of applications such as fast chair-side or bench side application on removal prostheses.
Packing:
1/Case
-
Benefits:
- High-grade tungsten carbide burs are developed to provide enhanced cutting efficiency with remarkable durability
- Uniform concentricity assures minimal vibration and precise trimming/ adjustment of either acrylic resin or cast metal
- Available in 6 different types of cutting surfaces and a total of 29 shapes:
Coarse (C) – for gross reduction of plaster
Normal Coarse (NC), Normal Cross Cut (N) & Basic Plain Cut (B) – for trimming and initial finishing
Normal Fine Cut (NF) & Diamond Fine Cut (DF) – for anatomical contouring and finishing
Indications:
Developed for efficient adjustment of acrylic resins, nickel-chrome cobalt alloys, chrome-nickel alloys and precious alloys.
A reliable range of carbide burs in different shapes with various flute designs to suit a variety of applications such as fast chair-side or bench side application on removal prostheses.
Packing:
1/Case
-
Benefits:
- High-grade tungsten carbide burs are developed to provide enhanced cutting efficiency with remarkable durability
- Uniform concentricity assures minimal vibration and precise trimming/ adjustment of either acrylic resin or cast metal
- Available in 6 different types of cutting surfaces and a total of 29 shapes:
Coarse (C) – for gross reduction of plaster
Normal Coarse (NC), Normal Cross Cut (N) & Basic Plain Cut (B) – for trimming and initial finishing
Normal Fine Cut (NF) & Diamond Fine Cut (DF) – for anatomical contouring and finishing
Indications:
Developed for efficient adjustment of acrylic resins, nickel-chrome cobalt alloys, chrome-nickel alloys and precious alloys.
A reliable range of carbide burs in different shapes with various flute designs to suit a variety of applications such as fast chair-side or bench side application on removal prostheses.
Packing:
1/Case
-
Benefits:
- High-grade tungsten carbide burs are developed to provide enhanced cutting efficiency with remarkable durability
- Uniform concentricity assures minimal vibration and precise trimming/ adjustment of either acrylic resin or cast metal
- Available in 6 different types of cutting surfaces and a total of 29 shapes:
Coarse (C) – for gross reduction of plaster
Normal Coarse (NC), Normal Cross Cut (N) & Basic Plain Cut (B) – for trimming and initial finishing
Normal Fine Cut (NF) & Diamond Fine Cut (DF) – for anatomical contouring and finishing
Indications:
Developed for efficient adjustment of acrylic resins, nickel-chrome cobalt alloys, chrome-nickel alloys and precious alloys.
Comprising ultra-fine diamond particles to ensure a smooth surface for fine finishing of crown preparations, composites, porcelain as well as glass ionomers.
Packing:
10/Box
-
Benefits:
- Uniform distribution of natural diamond particles ensure consistent performance
- Different grit sizes available for various clinical application
- Shank and working end are produced from a single blank
- Durable with precise concentricity
Indications:
Chairside
- Cavity and crown preparation, adjusting direct resin restorations
Laboratory
- Fine adjustment on ceramic and resin crowns, bridges, inlays and onlays as well as to finish approximal areas -
IOS No.: 249
Head Length (mm): 7.5
Head Size (1/10mm): 012
Total Lengh: Regular
Band Color: Yellow -
Use intermittently with low pressure and water coolant:
Recommended Speed Range: Less than 300,000 rpm
Comprising ultra-fine diamond particles to ensure a smooth surface for fine finishing of crown preparations, composites, porcelain as well as glass ionomers.
Packing:
10/Box
-
Benefits:
- Uniform distribution of natural diamond particles ensure consistent performance
- Different grit sizes available for various clinical application
- Shank and working end are produced from a single blank
- Durable with precise concentricity
Indications:
Chairside
- Cavity and crown preparation, adjusting direct resin restorations
Laboratory
- Fine adjustment on ceramic and resin crowns, bridges, inlays and onlays as well as to finish approximal areas -
IOS No.: 545
Head Length (mm): 5
Head Size (1/10mm): 018
Total Lengh: Regular
Band Color: Yellow -
Use intermittently with low pressure and water coolant:
Recommended Speed Range: Less than 450,000 rpm
Comprising ultra-fine diamond particles to ensure a smooth surface for fine finishing of crown preparations, composites, porcelain as well as glass ionomers.
Packing:
10/Box
-
Benefits:
- Uniform distribution of natural diamond particles ensure consistent performance
- Different grit sizes available for various clinical application
- Shank and working end are produced from a single blank
- Durable with precise concentricity
Indications:
Chairside
- Cavity and crown preparation, adjusting direct resin restorations
Laboratory
- Fine adjustment on ceramic and resin crowns, bridges, inlays and onlays as well as to finish approximal areas -
IOS No.: 249
Head Length (mm): 6
Head Size (1/10mm): 013
Total Lengh: Regular
Band Color: Yellow -
Use intermittently with low pressure and water coolant:
Recommended Speed Range: Less than 300,000 rpm
Comprising ultra-fine diamond particles to ensure a smooth surface for fine finishing of crown preparations, composites, porcelain as well as glass ionomers.
Packing:
10/Box
-
Benefits:
- Uniform distribution of natural diamond particles ensure consistent performance
- Different grit sizes available for various clinical application
- Shank and working end are produced from a single blank
- Durable with precise concentricity
Indications:
Chairside
- Cavity and crown preparation, adjusting direct resin restorations
Laboratory
- Fine adjustment on ceramic and resin crowns, bridges, inlays and onlays as well as to finish approximal areas -
IOS No.: 171
Head Length (mm): 7
Head Size (1/10mm): 015
Total Lengh: Regular
Band Color: Yellow -
Use intermittently with low pressure and water coolant:
Recommended Speed Range: Less than 450,000 rpm
Comprising ultra-fine diamond particles to ensure a smooth surface for fine finishing of crown preparations, composites, porcelain as well as glass ionomers.
Packing:
10/Box
-
Benefits:
- Uniform distribution of natural diamond particles ensure consistent performance
- Different grit sizes available for various clinical application
- Shank and working end are produced from a single blank
- Durable with precise concentricity
Indications:
Chairside
- Cavity and crown preparation, adjusting direct resin restorations
Laboratory
- Fine adjustment on ceramic and resin crowns, bridges, inlays and onlays as well as to finish approximal areas -
IOS No.: 198
Head Length (mm): 9
Head Size (1/10mm): 018
Total Lengh: Regular
Band Color: Yellow -
Use intermittently with low pressure and water coolant:
Recommended Speed Range: Less than 300,000 rpm