DMG Icon Proximal Caries Infiltrant 1 units *NEW Edition - With Icon Prime*
DMG Icon Proximal Caries Infiltrant 1 units *NEW Edition - With Icon Prime*
*NEW Edition - With Icon Prime*
Icon smooth surface is used to treat white spots in vestibular areas.
Icon Prime combines the innovative Icon Dry with MDP (methacryloyloxydecyl dihydrogen phosphate) and offers optimal preparation of the lesion surface for subsequent infiltration with Icon Vestibular.
Packing:
1 x Syringe @ 0,45 ml Icon-Etch
1 x Syringe @ 0,45 ml Icon Prime
1 x Syringe @ 0,45 ml Icon-Infiltrant
6 x Vestibular-Tips
1 x Luer-Lock-Tip
Brochure
Icon Proximal
Instructions for use
Icon Proximal
Safety datasheets
Icon Proximal
-
- Tooth friendly filling by infiltration- No drilling needed
- Gentle therapy approach for difficult- Toreach proximal lesions in just a few steps
- No unnecessary loss of healthy hard tissue
- Prolongs the life expectancy of the toothTips from the practice
1. Exact diagnosis with bitewing x-rays- Make use of bitewing x-rays for early diagnosis of proximal lesions
- Check the necessity of x-ray images in advance, for example through the use of fiber-optic transillumination devices
- A helpful accessory for these x-rays is the DMG Icon X-ray Holder System. It makes it possible to take multiple images in the same reproducible position, even over several sessions, and therefore simplifies the diagnosis and evaluation of the therapy’s success
2. Gentle tooth separation step by step
- It is best to proceed slowly with the tooth separation, a bit like stretching out a muscle. The tissue has to respond to the increase in pressure
- Guide the wedge into the interdental space until resistance is felt. The patient will experience this as a light pressure
- Hold the wedge in position for several seconds
- Softly push the wedge further until the widest part of the wedge creates enough separation between the teeth
3. Documentation in patient records
- Icon is not radiopaque
- This is because certain filler materials are necessary to make it radiopaque. These materials negatively affect the infiltrant’s flow properties and therefore its penetrative ability
- In order to document the procedure properly, the patient card included in every package should be marked and filed appropriately
The answer to white spots? I can Icon
Icon fills the gap between fluoridating and drilling.
Packing:
7 Treatment units each including :
1 x Syringe @ 0.3 ml Icon-Etch
1 x Syringe @ 0.45 ml Icon-Dry
1 x Syringe @ 0.45 ml Icon-Infiltrant
6 x Approximal-Tips
1 x Luer-Lock-Tip
4 x Dental wedges
Instructions for use
Icon
Safety datasheets
Icon Infiltrant
-
- Tooth friendly filling by infiltration – no drilling needed
- Gentle therapy approach for difficult-toreach proximal lesions in just a few steps
- No unnecessary loss of healthy hard tissue
- Prolongs the life expectancy of the tooth
Tips from the practice
1. Exact diagnosis with bitewing x-rays
- Make use of bitewing x-rays for early diagnosis of proximal lesions
- Check the necessity of x-ray images in advance, for example through the use of fiber-optic transillumination devices
- A helpful accessory for these x-rays is the DMG Icon X-ray Holder System. It makes it possible to take multiple images in the same reproducible position, even over several sessions, and therefore simplifies the diagnosis and evaluation of the therapy’s success
2. Gentle tooth separation step by step
- It is best to proceed slowly with the tooth separation, a bit like stretching out a muscle. The tissue has to respond to the increase in pressure
- Guide the wedge into the interdental space until resistance is felt. The patient will experience this as a light pressure
- Hold the wedge in position for several seconds
- Softly push the wedge further until the widest part of the wedge creates enough separation between the teeth
3. Documentation in patient records
- Icon is not radiopaque
- This is because certain filler materials are necessary to make it radiopaque. These materials negatively affect the infiltrant’s flow properties and therefore its penetrative ability
- In order to document the procedure properly, the patient card included in every package should be marked and filed appropriately
The answer to white spots? I can Icon
Icon Proximal Caries Infiltrant fills the gap between fluoridating and drilling.
Packing:
2 Treatment units each including:
1 x Syringe @ 0.3 ml Icon-Etch
1 x Syringe @ 0.45 ml Icon-Dry
1 x Syringe @ 0.45 ml Icon-Infiltrant
6 x Approximal-Tips
1 x Luer-Lock-Tip
4 x Dental wedges
Instructions for use
Icon
Safety datasheets
Icon Infiltrant
-
- Tooth friendly filling by infiltration – no drilling needed
- Gentle therapy approach for difficult-toreach proximal lesions in just a few steps
- No unnecessary loss of healthy hard tissue
- Prolongs the life expectancy of the tooth
Tips from the practice
1. Exact diagnosis with bitewing x-rays
- Make use of bitewing x-rays for early diagnosis of proximal lesions
- Check the necessity of x-ray images in advance, for example through the use of fiber-optic transillumination devices
- A helpful accessory for these x-rays is the DMG Icon X-ray Holder System. It makes it possible to take multiple images in the same reproducible position, even over several sessions, and therefore simplifies the diagnosis and evaluation of the therapy’s success
2. Gentle tooth separation step by step
- It is best to proceed slowly with the tooth separation, a bit like stretching out a muscle. The tissue has to respond to the increase in pressure
- Guide the wedge into the interdental space until resistance is felt. The patient will experience this as a light pressure
- Hold the wedge in position for several seconds
- Softly push the wedge further until the widest part of the wedge creates enough separation between the teeth
3. Documentation in patient records
- Icon is not radiopaque
- This is because certain filler materials are necessary to make it radiopaque. These materials negatively affect the infiltrant’s flow properties and therefore its penetrative ability
- In order to document the procedure properly, the patient card included in every package should be marked and filed appropriately
The answer to white spots? I can Icon -
-
Icon smooth surface is used to treat white spots in vestibular areas.
Packing:
1 x Syringe @ 0,45 ml Icon-Etch
1 x Syringe @ 0,45 ml Icon-Dry
1 x Syringe @ 0,45 ml Icon-Infiltrant
6 x Vestibular-Tips
1 x Luer-Lock-Tip
Brochure
Icon Vestibular
Instructions for use
Icon Vestibular
Safety datasheets
Icon Vestibular
-
- Gentle method for counteracting cariogenic white spots – with an esthetic side effect
- No unnecessary loss of healthy hard tissue
- User-friendly and patient-friendly application process in only one sitting
Tips from the practice
1. Re-etching »older« inactive white spots
- You can etch multiple times if there is a very thick pseudo-intact surface layer
- If the white discoloration disappears within a few seconds when ethanol (Icon-Dry) is applied, then it is sufficiently etched
- If the opaque discoloration remains, then the etching process should be repeated
- Up to three etching steps for two minutes per lesion are possible
2. Before/after documentation
- Optimize your patient communication process by taking before and after pictures
- These photos give your patients definitive proof about the success of the treatment
3. Fluorosis and other white spots
- Even non-cariogenic enamel changes can be treated with Icon.
- Experiences in practice show: Patients with fluorosis can be successfully treated, where it has proved useful to repeat the etching steps multiple times. Awaiting confirmation from clinical studies
- Enamel changes caused by trauma have been successfully treated. Awaiting confirmation from clinical studies
DMG Icon Vestibular Caries Infiltrant 1 units *NEW Edition - With Icon Prime*
DMG Icon Vestibular Caries Infiltrant 1 units *NEW Edition - With Icon Prime*
*NEW Edition - With Icon Prime*
Icon smooth surface is used to treat white spots in vestibular areas.
Icon Prime combines the innovative Icon Dry with MDP (methacryloyloxydecyl dihydrogen phosphate) and offers optimal preparation of the lesion surface for subsequent infiltration with Icon Vestibular.
Packing:
1 x Syringe @ 0,45 ml Icon-Etch
1 x Syringe @ 0,45 ml Icon Prime
1 x Syringe @ 0,45 ml Icon-Infiltrant
6 x Vestibular-Tips
1 x Luer-Lock-Tip
Brochure
Icon Vestibular
Instructions for use
Icon Vestibular
Safety datasheets
Icon Vestibular
-
- Gentle method for counteracting cariogenic white spots- with an esthetic side effect
- No unnecessary loss of healthy hard tissue
- User-friendly and patient-friendly application process in only one sitting
Tips from the practice
1. Re-etching »older« inactive white spots
- You can etch multiple times if there is a very thick pseudo-intact surface layer
- If the white discoloration disappears within a few seconds when ethanol (Icon-Prime) is applied, then it is sufficiently etched
- If the opaque discoloration remains, then the etching process should be repeated
- Up to three etching steps for two minutes per lesion are possible
2. Before/after documentation
- Optimize your patient communication process by taking before and after pictures
- These photos give your patients definitive proof about the success of the treatment
3. Fluorosis and other white spots
- Even non-cariogenic enamel changes can be treated with Icon.
- Experiences in practice show: Patients with fluorosis can be successfully treated, where it has proved useful to repeat the etching steps multiple times. Awaiting confirmation from clinical studies
- Enamel changes caused by trauma have been successfully treated. Awaiting confirmation from clinical studies
Icon smooth surface is used to treat white spots in vestibular areas.
Packing:
7 Treatment units each including:
1 x Syringe @ 0,45 ml Icon-Etch
1 x Syringe @ 0,45 ml Icon-Dry
1 x Syringe @ 0,45 ml Icon-Infiltrant
6 x Vestibular-Tips
1 x Luer-Lock-Tip
Instructions for use
Icon
Safety datasheets
Icon Infiltrant
-
- Gentle method for counteracting cariogenic white spots – with an esthetic side effect
- No unnecessary loss of healthy hard tissue
- User-friendly and patient-friendly application process in only one sitting
Tips from the practice
1. Re-etching »older« inactive white spots
- You can etch multiple times if there is a very thick pseudo-intact surface layer
- If the white discoloration disappears within a few seconds when ethanol (Icon-Dry) is applied, then it is sufficiently etched
- If the opaque discoloration remains, then the etching process should be repeated
- Up to three etching steps for two minutes per lesion are possible
2. Before/after documentation
- Optimize your patient communication process by taking before and after pictures
- These photos give your patients definitive proof about the success of the treatment
3. Fluorosis and other white spots
- Even non-cariogenic enamel changes can be treated with Icon.
- Experiences in practice show: Patients with fluorosis can be successfully treated, where it has proved useful to repeat the etching steps multiple times. Awaiting confirmation from clinical studies
- Enamel changes caused by trauma have been successfully treated. Awaiting confirmation from clinical studies
Icon Vestibular Caries Infiltrant is used to treat white spots in vestibular areas.
Packing:
2 Treatment units each including:
1 x Syringe @ 0,45 ml Icon-Etch
1 x Syringe @ 0,45 ml Icon-Dry
1 x Syringe @ 0,45 ml Icon-Infiltrant
6 x Vestibular-Tips
1 x Luer-Lock-Tip
Instructions for use
Icon
Safety datasheets
Icon Infiltrant
- - Gentle method for counteracting cariogenic white spots – with an esthetic side effect
- No unnecessary loss of healthy hard tissue
- User-friendly and patient-friendly application process in only one sitting
Tips from the practice
1. Re-etching »older« inactive white spots
- You can etch multiple times if there is a very thick pseudo-intact surface layer
- If the white discoloration disappears within a few seconds when ethanol (Icon-Dry) is applied, then it is sufficiently etched
- If the opaque discoloration remains, then the etching process should be repeated
- Up to three etching steps for two minutes per lesion are possible
2. Before/after documentation
- Optimize your patient communication process by taking before and after pictures
- These photos give your patients definitive proof about the success of the treatment
3. Fluorosis and other white spots
- Even non-cariogenic enamel changes can be treated with Icon.
- Experiences in practice show: Patients with fluorosis can be successfully treated, where it has proved useful to repeat the etching steps multiple times. Awaiting confirmation from clinical studies
- Enamel changes caused by trauma have been successfully treated. Awaiting confirmation from clinical studies
-
-
Ionosit-Baseliner is the »stress breaker« among the dental materials. This light curing active baseliner is the ideal one-component underfilling material for composite restorations. Instructions for Use
Its active chemistry compensates for the shrinkage typical with composite fillings, prevents marginal gap formations, and, with that, minimizes postoperative sensitivities, microfractures and secondary caries.
The material is radiopaque, provides fluoride release, and, due to its zinc content, has antibacterial properties.
Ionosit-Baseliner – for stress-free restorations.
Packing:
3 x 0.33g Saferinge
Ionosit-Baseliner
-
- Unique compensation for composite polymerization shrinkage stress
- Fluoride release
- Antibacterial properties
- No complicated handmixing
- Protects the pulp
- Seals the dentine tubules
- Prevents postoperative sensitivities
- Radio-opaque -
-
Ionosit-Baseliner is the »stress breaker« among the dental materials. This light curing active baseliner is the ideal one-component underfilling material for composite restorations. Instructions for Use
Its active chemistry compensates for the shrinkage typical with composite fillings, prevents marginal gap formations, and, with that, minimizes postoperative sensitivities, microfractures and secondary caries.
The material is radiopaque, provides fluoride release, and, due to its zinc content, has antibacterial properties.
Ionosit-Baseliner – for stress-free restorations.
Packing:
20 x 0.33g Saferinge
Ionosit-Baseliner
-
- Unique compensation for composite polymerization shrinkage stress
- Fluoride release
- Antibacterial properties
- No complicated handmixing
- Protects the pulp
- Seals the dentine tubules
- Prevents postoperative sensitivities
- Radio-opaque -
-
Ionosit-Baseliner is the »stress breaker« among the dental materials. This light curing active baseliner is the ideal one-component underfilling material for composite restorations. Instructions for Use
Its active chemistry compensates for the shrinkage typical with composite fillings, prevents marginal gap formations, and, with that, minimizes postoperative sensitivities, microfractures and secondary caries.
The material is radiopaque, provides fluoride release, and, due to its zinc content, has antibacterial properties.
Ionosit-Baseliner – for stress-free restorations.
Packing:
2 x 1.5g Syringes
Ionosit-Baseliner
-
- Unique compensation for composite polymerization shrinkage stress
- Fluoride release
- Antibacterial properties
- No complicated handmixing
- Protects the pulp
- Seals the dentine tubules
- Prevents postoperative sensitivities
- Radio-opaque -
-
LuxaBite is an innovative rigid bisacryl bite registration material that combines superior handling properties and a firmer setting to yield the most accurate, hard and stable bite registrations on the market. Developed with industry-leading clinicians Ross Nash, DDS, David Hornbrook, DDS, FAACD, and Mark Montgomery, DMD, LuxaBite is the ideal bite registration choice for all types of bite relationships.
Brochure Instructions for use
Packing:
1 x 50ml Cartridge
15 x Automix Tips
LuxaBite
LuxaBite
-
- Excellent stability
- The hardest bite registration material
- No compression on mounting
- Patient-friendly formula: tasteless and odorless
- Easy to trim with a high-speed bur
- Superior accuracy
- Offers minimal resistance to closure of teeth
- Fast setting
Rigid bite registration
Its thixotropic properties prevent the material from flowing into approximal spaces, and its superior final high hardness (Shore D-69, or Barcol 25 after 1hr) eliminates compression or flexing when mounted to facilitate precise bite registrations. LuxaBite is automatically mixed to a homogenous, bubble-free, non-slumping consistency and can be directly applied.
And, besides LuxaBite’s stability when positioned on the model, dental assistants value the conveniently easy excess removal with a dental bur. After all, the material should be hard, not the work.
Hardest quality bite registrations
Besides a precise impression material an exact bite registration is the key for the fabrication of high-quality and perfectly fitting restorations.
With its outstanding rigidity LuxaBite provides the prerequisite for a precise reproduction of the oral situation, enabling the dentist to integrate perfectly fitting restorations without the need for corrections. The contrasting blue color record is break-proof and easy to trim.
LuxaBite’s extreme hardness combined with the user-friendly application with the Automix guarantees a clean and reliable fixation.
Its superior handling properties and firmer setting yield the most accurate and stable bite registrations on the market. -
Composition: Bisacryl (Glass filler in a matrix of multifunctional methacrylates - no methyl methacrylate or peroxides)
Total Working Time: 45 seconds after start mix
Rubbery Phase: 2-2:30 minutes after start mix
End of Setting: 4 minutes after removal from mouth
Barcol Hardness: 20 after 1 hour -