Sort by:
107 products
107 products
3M Polycarbonate Temporary Crowns for Anteriors and Bicuspid Introductory Kit 180/Set
3M Polycarbonate Temporary Crowns for Anteriors and Bicuspid Introductory Kit 180/Set
Packing:
180/Set
-
Prefabricated crowns made from polycarbonate resin with microglass fibers for short- or longer-term adult anterior use. Kit contains: 180 crowns
180 Adult Anterior Polycarbonate Replacement Crowns, assorted.
- Polycarbonate material contours and crimps similar to metal crowns to yield easy adaptation to margins
- Made from polycarbonate resin with microglass fibers for strength and durability. Ideal for short- or longer-term use, providing the option of offering an esthetic, longer-term temporary for patients with economic considerations
- Universal shade No. 62 can be adjusted using cements and liners for better esthetics
- Temporary crowns for anterior and bicuspid restorations
Disposable syringe tips for dispensing 3M™ Scotchbond™ Phosphoric Etchant.
Packing:
25 x Dispensing Tips
-
The tip can be individually adjusted before application
-
Category Name: Disposable Syringes & Tips
-
Suggested Applications: Dispensing 3M™ Scotchbond™ Phosphoric Etchant
The first radiopaque universal adhesive, minimising the risk of X-ray misdiagnosis and invasive overtreatment.
Packing:
1 x 5ml Vial
50 x Disposable Brushes
1 x 3ml Syringe Etchant
25 x Dispensing Tips
-
- Universal adhesive suitable for all direct and indirect bonding indications and all etching techniques
- Virtually no post-operative sensitivity
- Gold standard adhesion to all tooth and restoration substrates without separate primers, silanes or activators
- New formulation New formulation free of BPA derivatives like BisGMA
- Bonds and seals caries affected dentine, supporting minimally invasive dentistry to maximize preservation of natural tooth
- Fully aligned system with 3M™ RelyX™ Universal Resin Cement
- Available in a streamlined flip-top vial (up to 200 applications) or unit dose for efficient hygiene management -
Cure Type: Light Cure
Delivery System: Vial
Universal adhesive suitable for all direct and indirect bonding indications and all etching techniques.
Packing:
50 x 3ml L-Pop 1 Syringe Etchant
25 x Dispensing Tips
-
- Virtually no post-operative sensitivity
- Gold standard adhesion to all tooth and restoration substrates without separate primers, silanes or activators
- New formulation New formulation New formulation free of BPA derivatives like BisGMA
- Bonds and seals caries affected dentine, supporting minimally invasive dentistry to maximize preservation of natural tooth
- Fully aligned system with 3M™ RelyX™ Universal Resin Cement
- Available in a streamlined flip-top vial (up to 200 applications) or unit dose for efficient hygiene management -
Cure Type: Light Cure
Delivery System: Unit Dose
-
Universal adhesive suitable for all direct and indirect bonding indications and all etching techniques.
Packing:
1 x 5ml Vial
-
- Virtually no post-operative sensitivity
- Gold standard adhesion to all tooth and restoration substrates without separate primers, silanes or activators
- New formulation New formulation free of BPA derivatives like BisGMA
- Bonds and seals caries affected dentine, supporting minimally invasive dentistry to maximize preservation of natural tooth
- Fully aligned system with 3M™ RelyX™ Universal Resin Cement
- Available in a streamlined flip-top vial (up to 200 applications) or unit dose for efficient hygiene management -
Cure Type: Light Cure
Delivery System: Vial
C&B contact finder
Packing:
9 x Straight
9 x Angled
-
Before cementation of conventional crowns, bridges and implant prosthetics, it is necessary to assess the relationship of the crown to the neighboring teeth. Occlusion paper is often used to check the contact point. This method however shows a too broad and inaccurate contact point with the subsequent risk of excessive adjustment, often resulting in too large contact point. Spotit is a coloured marker available in straight and angled handle. As the marker traverses the contact between the prosthetic element and the adjacent tooth it leaves a clear and accurate indication of the adjustment needed for a perfect contact point. The whole operation can be performed without assistance - holding the crown with one hand and the marker with the other hand. Adjusting contact points on crowns and bridges has never been easier!
4 reasons to use Spotit®
1. Exact indication for adjustment of C&B work
2. Optimal access
3. Easy handling
4. No mess
-
-
Dual-curing adhesive system
- Self-curing: Hardens even without light
- No premature polymerization of bonding »pools«
- Compatible with self-curing and dual-curing materials
- Suitable for all applications with LuxaCore
- Pre-Bond facilitates quicker curing of the bond mix in the dentine for superior retention
- Easy root canal application with special
- Endobrushes
- Does not contain acetone
Packing:
1/Package
-
Flexible range of applications
LuxaBond-Total Etch is the final component in DMG‘s product range for post-endodontic restorations. The adhesive system is also suitable for fixing inlays. Self-curing does more than just allow it to be used in areas that the light does not reach.
Even the unwanted premature curing of pools on the floor of the cavity (the »pooling effect«) can be avoided, as the curing can also be done entirely after insertion of the post. LuxaBond-Total Etch can generally be used with LuxaCoreZ-Dual for core build-up or for adhesive cementation of crowns and bridges with Vitique or PermaCem. In these cases, there is the option of curing it with light.
Reliable bond
The pre-bonding that facilitates the superior bonding properties of the system is applied after separate etching of the enamel and the dentine. It ensures that the bonding mixture (consisting of components A and B) hardens very quickly after application to the tooth material. It means that a ready-made anchor layer is present even before the introduction of the restoration material. In addition, the pre-bonding allows a longer processing time for the bonding mixture, as its curing is only accelerated when it comes into contact with the pre-bond. For easy handling, the order of application is specified on the bottles, with color codes to indicate the bond components. -
1 x Bottle @ 5 ml Pre-Bond
1 x Bottle @ 5 ml Bond A
1 x Bottle @ 5 ml Bond B
1 x Syringe @ 2 ml Etching Gel Medium Viscosity
25 x Endobrushes Red
25 x Endobrushes Black
3 x Luer-Lock-Tips
1 Mixing pad -
Premium composite for core build-up and root post cementation.
- Cuts like dentine
- Extremely high compressive strength
- Excellent flow properties
- Reliable curing
- One material for building up and cementing
Automix Packing:
1 x 48g Cartridge
30 x Automix-Tips Yellow
20 x Intraoral-Tips Yellow
10 x Endo-Tips Yellow
Smartmix Packing:
2 x 9g Smartmix-syringes
10 x Smartmix Tips Combi
10 x Smartmix Tips Endo
Instructions for use
LuxaCore Z - Dual
-
Genuine dentine feeling for precise preparation
LuxaCore Z DMG’s premium composite for core build-ups and post cementation provides dentine-like cuttability, which ensures controlled substance removal and a precise preparation margin. LuxaCore Z gives you optimal guidance control of the bur. At the transitions between dentine and LuxaCore Z you will not notice any difference. This tactile stability permits groove-free preparations without any undercuts, presenting ideal conditions for the dental technician to perform precise work.
The result: excellent fit, a long-lasting restoration and the best possible care for your patient.
The right partners allow quality care to be provided perfectly: The LuxaPost composite post and the LuxaBond-Total Etch adhesive system give the dentist the best possible assistance.
Superior values.
LuxaCore Z-Dual is closer to natural dentine than the competition in terms of cutability.
Moreover, the proportion of zirconia gives excellent compressive strength.
This ensures top-quality, natural restorations – and this has been confirmed in figures as well, as shown in the graphs on the right.
Excellent flow properties.
The material‘s outstanding flow properties guarantee optimum adaptation to the shape of cavity walls and posts.
When used as a post cement, the thin film thickness of just 20 μm is beneficial (the limit for precision cement according to ISO 4049 is 25 μm). -
-