Sort by:
334 products
334 products
Coat-It is a light-cured self-adhesive resin coat designed to provide a strong and protective seal on the surface of Glass Ionomers, provisionals and direct resins for enhanced mechanical properties, durability and aesthetics of the restoration.
Packing:
Coat It 6ml
50 x Disposable Brush Fine (Pink)
25 x V-Dish
-
- Remarkably natural surface gloss with just 10 seconds of cure
- High degree of surface cure with minimal residual monomer
- Seals, protects and strengthens surface of glass ionomers, provisional restoration and direct resins
- Remarkable wear and stain resistance for restorations that remain stable over time
- Exceptionally strong and durable bond to various substrates- to enamel, dentin, glass ionomer and resins with virtually no gap -
-
All it takes is a thin layer of Coat-It (LED / Halogen) to significantly decrease the surface roughness on the Glass Ionomer restoration and boost its strength.
Super-Snap X-TREME Standard disk kit with 50 pcs each of red and green X-TREME standard disks while the X-TREME Mini-Disk kit contains 50 pcs each of red and green X-TREME mini disks.
Packing:
1/Kit
-
Benefits:
- Specific abrasive grits used for each of the 3 co-ordinated polishing steps
- Abrasive grains and binder are perfectly matched
- High gloss polishing without the need of additional, messy polishing paste
-Low vibration and minimal heat generation
Indications:
Available in 3 differeent grits HP Shanks only:
Coarse (dark grey) - for adjusting
Medium (brown) - for finishing and pre-polishing
Fine (light grey) - for polishing -
Super-Snap X-TREME Mini Disk Kit [PN 0507] Contains:
- Super-Snap X-TREME Mini Green & Red Disks x 50 -
Recommened Speed Range : 10000-12000 rpm/ Max 15000 rpm
Contact Pressure: 0.3-0.6 N
Usage Note: Dry
Made of a high concentration of aluminium oxide with silicone as binder, created specially for finishing and polishing of direct resin restorations with only one instrument, just by altering the contact pressure.
OneGloss Complete Set Contains:
Unmounted Polishers x 20 each shape, CA Mandrels x3
Packing:
20/Unmounted Polishers
3/CA Mandrels
-
Benefits:
- Saves time as finishing and polishing can be achieved with a single instrument
- Eliminates the need for polishing paste
- Disposable polishers comply with infection control protocols
- Low vibration and minimal heat generation
Indications:
Ideal for:
- Finishing and polishing of all tooth coloured restorations
- Creating surface texture on direct cosmetic restorations
- Removing surface stain without damaging the enamel
- Polishing enamel after scaling
- Removing excess cement without marring enamel or damaging delicate inlays
- Removing excess cement after Orthodontic debanding -
Shape: Cup, Midipoint, IC, Mandrel
ISO No.: 060, 060, 100
-
Recommened Speed Range: 3000-10000 rpm/ Max. 15000 rpm
Contact Pressure: 1N (for Finishing)/ Feather Light (for Polishing)
Usage Note: Water coolant when finishing & Dry when polishing
Comprising ultra-fine diamond particles to ensure a smooth surface for fine finishing of crown preparations, composites, porcelain as well as glass ionomers.
Packing:
10/Box
-
Benefits:
- Uniform distribution of natural diamond particles ensure consistent performance
- Different grit sizes available for various clinical application
- Shank and working end are produced from a single blank
- Durable with precise concentricity
Indications:
Chairside
- Cavity and crown preparation, adjusting direct resin restorations
Laboratory
- Fine adjustment on ceramic and resin crowns, bridges, inlays and onlays as well as to finish approximal areas -
IOS No.: 165
Head Length (mm): 8
Head Size (1/10mm): 010
Total Lengh: Regular
v
Band Color: Yellow -
Use intermittently with low pressure and water coolant:
Recommended Speed Range: Less than 300,000 rpm
Designed for cavity and tooth preparation in 88 different shapes, some shapes are available in short (1000 class) and supershort (3000 class) shanks.
Packing:
10/Box
-
Benefits:
- Uniform distribution of natural diamond particles ensure consistent performance
- Different grit sizes available for various clinical application
- Shank and working end are produced from a single blank
- Durable with precise concentricity
Indications:
Chairside
- Cavity and crown preparation, adjusting direct resin restorations
Laboratory
- Fine adjustment on ceramic and resin crowns, bridges, inlays and onlays as well as to finish approximal areas -
IOS No.: 001
Head Length (mm): 1.2
Head Size (1/10mm): 013
Total Lengh: Regular
Band Color: Unbanded -
Use intermittently with low pressure and water coolant:
Recommended Speed Range: Less than 450,000 rpm
Designed for cavity and tooth preparation in 88 different shapes, some shapes are available in short (1000 class) and supershort (3000 class) shanks.
Packing:
10/Box
-
Benefits:
- Uniform distribution of natural diamond particles ensure consistent performance
- Different grit sizes available for various clinical application
- Shank and working end are produced from a single blank
- Durable with precise concentricity
Indications:
Chairside
- Cavity and crown preparation, adjusting direct resin restorations
Laboratory
- Fine adjustment on ceramic and resin crowns, bridges, inlays and onlays as well as to finish approximal areas -
IOS No.: 223
Head Length (mm): 9
Head Size (1/10mm): 017
Total Lengh: Super Short
Band Color: Unbanded -
Use intermittently with low pressure and water coolant:
Recommended Speed Range: Less than 300,000 rpm
Designed for cavity and tooth preparation in 88 different shapes, some shapes are available in short (1000 class) and supershort (3000 class) shanks.
Packing:
10/Box
-
Benefits:
- Uniform distribution of natural diamond particles ensure consistent performance
- Different grit sizes available for various clinical application
- Shank and working end are produced from a single blank
- Durable with precise concentricity
Indications:
Chairside
- Cavity and crown preparation, adjusting direct resin restorations
Laboratory
- Fine adjustment on ceramic and resin crowns, bridges, inlays and onlays as well as to finish approximal areas -
IOS No.: 237
Head Length (mm): 5
Head Size (1/10mm): 021
Total Lengh: Regular
Band Color: Unbanded -
Use intermittently with low pressure and water coolant:
Recommended Speed Range: Less than 300,000 rpm
Coltene Diatech Speedstar S5 Round End Cylinder Cross Cut FG/FGSS 5's/Pack
Coltene Diatech Speedstar S5 Round End Cylinder Cross Cut FG/FGSS 5's/Pack
Crafted using state of the art technology, Speedster burs are made from a solid piece of sub-micron grain premium carbide. MultiAxial precision grinding processes implement carefully designed angulations, flute depths, rake angles, and blading for optimal geometry and cutting performance.
Packing:
5's/Pack
Product Brochure
Diatech Speedstar
-
- Outstanding cutting efficiency reduces preparation and chair time
- Consistent blade contact with tooth surface for smoother cutting
- Reduced vibration and chatter
- Less damage to the tooth structure
- High wear resistance
- High durability -