排序方式：
86 件商品
86 件商品
Designed to securely hold all Shofu unmounted wheels and disks for optimal control during laboratory use with a straight handpiece.
Packing:
12/Box
-
Benefits:
- Available in both HP & CA shank, in a box of 12's
- 2 specific types of CA Mandrels are available (Latch type):
1. CA Mandrel with Christmas tree shaped head securely holds the flexible plastic mounts of Super-Snap, Super-Snap Buff and SuperBuff disks in place
2. CA Mandrel (white banded shank) with a specially designed smooth head attached securely to the OneGloss polishers
Diamond impregnated polishers with a unique blend of silicone and even distribution of diamond particles for glazed-like polishing of porcelain.
Packing:
3/Box
-
Benefits:
- Durable, cost effective and avaailable in HP as well as CA shanks to suit all polishing sufaces
- Dense impregnation of natural diamond particles eliminates the need for any messy polishing paste
- Superior surface finish with minimal heat generation and low risk of fracture
Indications:
A simple 2 step finishing and polishing system, ideal for intra-oral, chairside or laboratory use
CeraMaster Coarse (dark gray polisher) - for quick finishing and pre-polishing of ceramic restorations in just one step; Extremely efficient for adusting ceramic margins of alumina or zirconia coping, without any risk of chipping
CeraMaster (blue and white banded shank) - for superpolishing all types of ceramic -
Shape: Minipoint
ISO No.: 030
Shank: HP -
Recommened Speed Range (Mounted Polishers): 10000-15000 rpm / Max. 20000 rpm, Contact Pressure: 1.5 N
Recommened Speed Range (Unmounted Wheel): 5000-10000 rpm / Max. 15000 rpm, Contact Pressure: 1.5 N
Usage note: Intra-oral polishing should be done in dry conditions with intermittent strokes; excessive overheating of pulp is avoided by coding with stream of compressed air
Diamond impregnated polishers with a unique blend of silicone and even distribution of diamond particles for glazed-like polishing of porcelain.
Packing:
3/Box
-
Benefits:
- Durable, cost effective and avaailable in HP as well as CA shanks to suit all polishing sufaces
- Dense impregnation of natural diamond particles eliminates the need for any messy polishing paste
- Superior surface finish with minimal heat generation and low risk of fracture
Indications:
A simple 2 step finishing and polishing system, ideal for intra-oral, chairside or laboratory use
CeraMaster Coarse (dark gray polisher) - for quick finishing and pre-polishing of ceramic restorations in just one step; Extremely efficient for adusting ceramic margins of alumina or zirconia coping, without any risk of chipping
CeraMaster (blue and white banded shank) - for superpolishing all types of ceramic -
Shape: KN7
ISO No.: 125
Shank:HP -
Recommened Speed Range (Mounted Polishers): 10000-15000 rpm / Max. 20000 rpm, Contact Pressure: 1.5 N
Recommened Speed Range (Unmounted Wheel): 5000-10000 rpm / Max. 15000 rpm, Contact Pressure: 1.5 N
Usage note: Intra-oral polishing should be done in dry conditions with intermittent strokes; excessive overheating of pulp is avoided by coding with stream of compressed air
Diamond impregnated polishers with a unique blend of silicone and even distribution of diamond particles for glazed-like polishing of porcelain.
Packing:
3/Box
-
Benefits:
- Durable, cost effective and avaailable in HP as well as CA shanks to suit all polishing sufaces
- Dense impregnation of natural diamond particles eliminates the need for any messy polishing paste
- Superior surface finish with minimal heat generation and low risk of fracture
Indications:
A simple 2 step finishing and polishing system, ideal for intra-oral, chairside or laboratory use
CeraMaster Coarse (dark gray polisher) - for quick finishing and pre-polishing of ceramic restorations in just one step; Extremely efficient for adusting ceramic margins of alumina or zirconia coping, without any risk of chipping
CeraMaster (blue and white banded shank) - for superpolishing all types of ceramic -
Shape: Bullet
ISO No.: 040
Shank: HP -
Recommened Speed Range (Mounted Polishers): 10000-15000 rpm / Max. 20000 rpm, Contact Pressure: 1.5 N
Recommened Speed Range (Unmounted Wheel): 5000-10000 rpm / Max. 15000 rpm, Contact Pressure: 1.5 N
Usage note: Intra-oral polishing should be done in dry conditions with intermittent strokes; excessive overheating of pulp is avoided by coding with stream of compressed air
Impregnated with silicon carbide abrasive grit for use on porcelain or indirect composite.
Packing:
12/Box
-
Benefits:
- Recommended for polishing porcelain surfaces prior to glazing to lower the firing temperature and enhance aesthetics
- Fine finishing and polishing of porcelain restorations in just one step, by simply altering the contact pressure. Lighter the pressure, higher the gloss
- Uniform concentricity for minimal vibration
- Low heat generation minimizes risk of porcelain micro fracture
Indications:
Specially created for fine finishing, creating surface texture & polishing porcelain as well as indirect composite restorations.
Soft Cut is available in:
PA Grit (green band) - for fine finishing and smoothening after finishing with Dura-Green stones
PB Grit (blue band) - for polishing after fine finishing -
Shape: Unmounted Wheel
ISO No.: 220
Shank: HP -
Recommened Speed Range (Mounted Polishers): 5000-20000 rpm / Max. 20000 rpm, Contact Pressure: 1-2 N
Recommened Speed Range (Unmounted Wheel): 5000-15000 rpm, Contact Pressure: 1-2 N
Impregnated with silicon carbide abrasive grit for use on porcelain or indirect composite.
Packing:
12/Box
-
Benefits:
- Recommended for polishing porcelain surfaces prior to glazing to lower the firing temperature and enhance aesthetics
- Fine finishing and polishing of porcelain restorations in just one step, by simply altering the contact pressure. Lighter the pressure, higher the gloss
- Uniform concentricity for minimal vibration
- Low heat generation minimizes risk of porcelain micro fracture
Indications:
Specially created for fine finishing, creating surface texture & polishing porcelain as well as indirect composite restorations.
Soft Cut is available in:
PA Grit (green band) - for fine finishing and smoothening after finishing with Dura-Green stones
PB Grit (blue band) - for polishing after fine finishing -
Shape: WH6
ISO No.: 120
Shank: HP -
Recommened Speed Range (Mounted Polishers): 5000-20000 rpm / Max. 20000 rpm, Contact Pressure: 1-2 N
Recommened Speed Range (Unmounted Wheel): 5000-15000 rpm, Contact Pressure: 1-2 N
Impregnated with silicon carbide abrasive grit for use on porcelain or indirect composite.
Packing:
12/Box
-
Benefits:
- Recommended for polishing porcelain surfaces prior to glazing to lower the firing temperature and enhance aesthetics
- Fine finishing and polishing of porcelain restorations in just one step, by simply altering the contact pressure. Lighter the pressure, higher the gloss
- Uniform concentricity for minimal vibration
- Low heat generation minimizes risk of porcelain micro fracture
Indications:
Specially created for fine finishing, creating surface texture & polishing porcelain as well as indirect composite restorations.
Soft Cut is available in:
PA Grit (green band) - for fine finishing and smoothening after finishing with Dura-Green stones
PB Grit (blue band) - for polishing after fine finishing -
Shape: PC2
ISO No.: 050
Shank: HP -
Recommened Speed Range (Mounted Polishers): 5000-20000 rpm / Max. 20000 rpm, Contact Pressure: 1-2 N
Recommened Speed Range (Unmounted Wheel): 5000-15000 rpm, Contact Pressure: 1-2 N
Diamond impregnated polishers with a unique blend of silicone and even distribution of diamond particles for glazed-like polishing of porcelain.
Packing:
3/Box
-
Benefits:
- Durable, cost-effective and available in HP as well as CA shanks to suit all polishing surfaces
- Dense impregnation of natural diamond particles eliminates the need for any messy polishing paste
- Superior surface finish with minimal heat generation and low risk of fracture
Indications:
A simple 2 step finishing and polishing system, ideal for intra-oral, chairside or laboratory use
CeraMaster Coarse (dark gray polisher) -
for quick finishing and pre-polishing of ceramic restorations in just one step; Extremely efficient for adusting ceramic margins of alumina or zirconia coping, without any risk of chipping
CeraMaster (blue and white banded shank)
for superpolishing all types of ceramic restorations -
Shape: KN7
ISO No.: 125
Shank: HP -
Recommened Speed Range(Mounted Polishers): 10000-15000 rpm/ Max. 20000 rpm, Contact Pressure: 1.5N
Recommended Speed Range(Unmounted Wheel): 5000-10000 rpm/ Max. 15000 rpm, Contact Pressure: 1.5N