Specially designed aluminum oxide impregnated felt disks with easy to use snap-on system for superpolishing all direct resins.
Packing:
50/Box
-
Benefits:
- Integrated polishing paste in the disk ensures faster polishing while keeping the work area clean
- Disks can be soaked in water until soft and flexible to activate polishing compound just before use
-Thick disk design enables super polishing of occlusal surfaces efficiently
- Able to super polish multiple surfaces in a single bound without the mess of polishing pastes
Indications:
Developed to achieve high gloss polishing of all types of direct tooth coloured restorations. -
Refills:
Disk x 50 pack in a box -
Recommened Speed Range : 8000-12000 rpm/ Max. 15000 rpm
Contact Pressure: 0.8 N
Usage Note: Moisten completely before use
Diamond impregnated polishing paste for intra-oral high gloss polish.
Packing:
1/Syringe
-
Benefits:
- Made of micro-fine synthetic diamond particles (2-4 in size) that makes up 20% paste compostition for maximum polishing results.
- Light green smotth paste is easy to distinguish with palatable lime flavour for superior handling and maximum patient comfort
- Application tip ensures precise dispensing
- Long shelf life of 3 years
- Recommended for use with Super-Snap Buff Disk
Indications:
Designed for super polishing of natural teeth after cosmetic contouring as well as porcelain, composite and metal restorations. -
Individually packed in a syringe of 3gm
Diamond impregnated polishers with a unique blend of silicone and even distribution of diamond particles for glazed-like polishing of porcelain.
Packing:
3/Box
-
Benefits:
- Durable, cost effective and avaailable in HP as well as CA shanks to suit all polishing sufaces
- Dense impregnation of natural diamond particles eliminates the need for any messy polishing paste
- Superior surface finish with minimal heat generation and low risk of fracture
Indications:
A simple 2 step finishing and polishing system, ideal for intra-oral, chairside or laboratory use
CeraMaster Coarse (dark gray polisher) - for quick finishing and pre-polishing of ceramic restorations in just one step; Extremely efficient for adusting ceramic margins of alumina or zirconia coping, without any risk of chipping
CeraMaster (blue and white banded shank) - for superpolishing all types of ceramic -
Shape: Knife
ISO No.: 090
Shank: CA -
Recommened Speed Range (Mounted Polishers): 10000-15000 rpm / Max. 20000 rpm, Contact Pressure: 1.5 N
Recommened Speed Range (Unmounted Wheel): 5000-10000 rpm / Max. 15000 rpm, Contact Pressure: 1.5 N
Usage note: Intra-oral polishing should be done in dry conditions with intermittent strokes; excessive overheating of pulp is avoided by coding with stream of compressed air
Diamond impregnated polishers with a unique blend of silicone and even distribution of diamond particles for glazed-like polishing of porcelain.
Packing:
3/Box
-
Benefits:
- Durable, cost effective and avaailable in HP as well as CA shanks to suit all polishing sufaces
- Dense impregnation of natural diamond particles eliminates the need for any messy polishing paste
- Superior surface finish with minimal heat generation and low risk of fracture
Indications:
A simple 2 step finishing and polishing system, ideal for intra-oral, chairside or laboratory use
CeraMaster Coarse (dark gray polisher) - for quick finishing and pre-polishing of ceramic restorations in just one step; Extremely efficient for adusting ceramic margins of alumina or zirconia coping, without any risk of chipping
CeraMaster (blue and white banded shank) - for superpolishing all types of ceramic -
Shape: Minipoint
ISO No.: 030
Shank: CA -
Recommened Speed Range (Mounted Polishers): 10000-15000 rpm / Max. 20000 rpm, Contact Pressure: 1.5 N
Recommened Speed Range (Unmounted Wheel): 5000-10000 rpm / Max. 15000 rpm, Contact Pressure: 1.5 N
Usage note: Intra-oral polishing should be done in dry conditions with intermittent strokes; excessive overheating of pulp is avoided by coding with stream of compressed air
Diamond impregnated polishers with a unique blend of silicone and even distribution of diamond particles for glazed-like polishing of porcelain.
Packing:
3/Box
-
Benefits:
- Durable, cost effective and avaailable in HP as well as CA shanks to suit all polishing sufaces
- Dense impregnation of natural diamond particles eliminates the need for any messy polishing paste
- Superior surface finish with minimal heat generation and low risk of fracture
Indications:
A simple 2 step finishing and polishing system, ideal for intra-oral, chairside or laboratory use
CeraMaster Coarse (dark gray polisher) - for quick finishing and pre-polishing of ceramic restorations in just one step; Extremely efficient for adusting ceramic margins of alumina or zirconia coping, without any risk of chipping
CeraMaster (blue and white banded shank) - for superpolishing all types of ceramic -
Shape: Bullet
ISO No.: 040
Shank: HP -
Recommened Speed Range (Mounted Polishers): 10000-15000 rpm / Max. 20000 rpm, Contact Pressure: 1.5 N
Recommened Speed Range (Unmounted Wheel): 5000-10000 rpm / Max. 15000 rpm, Contact Pressure: 1.5 N
Usage note: Intra-oral polishing should be done in dry conditions with intermittent strokes; excessive overheating of pulp is avoided by coding with stream of compressed air
Diamond impregnated polishers with a unique blend of silicone and even distribution of diamond particles for glazed-like polishing of porcelain.
Packing:
3/Box
-
Benefits:
- Durable, cost effective and avaailable in HP as well as CA shanks to suit all polishing sufaces
- Dense impregnation of natural diamond particles eliminates the need for any messy polishing paste
- Superior surface finish with minimal heat generation and low risk of fracture
Indications:
A simple 2 step finishing and polishing system, ideal for intra-oral, chairside or laboratory use
CeraMaster Coarse (dark gray polisher) - for quick finishing and pre-polishing of ceramic restorations in just one step; Extremely efficient for adusting ceramic margins of alumina or zirconia coping, without any risk of chipping
CeraMaster (blue and white banded shank) - for superpolishing all types of ceramic -
Shape: KN7
ISO No.: 125
Shank:HP -
Recommened Speed Range (Mounted Polishers): 10000-15000 rpm / Max. 20000 rpm, Contact Pressure: 1.5 N
Recommened Speed Range (Unmounted Wheel): 5000-10000 rpm / Max. 15000 rpm, Contact Pressure: 1.5 N
Usage note: Intra-oral polishing should be done in dry conditions with intermittent strokes; excessive overheating of pulp is avoided by coding with stream of compressed air
Diamond impregnated polishers with a unique blend of silicone and even distribution of diamond particles for glazed-like polishing of porcelain.
Packing:
3/Box
-
Benefits:
- Durable, cost effective and avaailable in HP as well as CA shanks to suit all polishing sufaces
- Dense impregnation of natural diamond particles eliminates the need for any messy polishing paste
- Superior surface finish with minimal heat generation and low risk of fracture
Indications:
A simple 2 step finishing and polishing system, ideal for intra-oral, chairside or laboratory use
CeraMaster Coarse (dark gray polisher) - for quick finishing and pre-polishing of ceramic restorations in just one step; Extremely efficient for adusting ceramic margins of alumina or zirconia coping, without any risk of chipping
CeraMaster (blue and white banded shank) - for superpolishing all types of ceramic -
Shape: Minipoint
ISO No.: 030
Shank: HP -
Recommened Speed Range (Mounted Polishers): 10000-15000 rpm / Max. 20000 rpm, Contact Pressure: 1.5 N
Recommened Speed Range (Unmounted Wheel): 5000-10000 rpm / Max. 15000 rpm, Contact Pressure: 1.5 N
Usage note: Intra-oral polishing should be done in dry conditions with intermittent strokes; excessive overheating of pulp is avoided by coding with stream of compressed air
Acrypoints are designed incorporating the unique polishing tecnology of Shofu, for adjusting, finishing & polishing of all types of acrylic appliances, impression trays and acrylic dentures to a high lustre, in the laboratory or chairside.
-
Benefits:
- Specific abrasive grits used for each of the 3 co-ordinated polishing steps
- Abrasive grains and binder are perfectly matched
- High gloss polishing without the need of additional, messy polishing paste
-Low vibration and minimal heat generation
Indications:
Available in 3 different grits HP Shanks only:
Coarse (dark grey) - for adjusting
Medium (brown) - for finishing and pre-polishing
Fine (light grey) - for polishing - Shank: HP (Handpiece)
-
Recommened Speed Range : 5000-10000 rpm / Max. 15000 rpm
Contact Pressure: 3-5 N