Shofu HY-Bond Polycarboxylate Cement 1-1 Set 1x 60g Powder 1 x 33ml Liquid
Shofu HY-Bond Polycarboxylate Cement 1-1 Set 1x 60g Powder 1 x 33ml Liquid
Developed with SHOFU’s patented HY-Agent additive (tannin-fluoride), HY-Bond Polycaroboxylate cement is indicated specifically for successful cementation of cast restorations and orthodontic appliances. The HY-Agent helps to minimize post-operative sensitivity and increase compressive strength.
Packing:
1x 60g Powder
1 x 33ml Liquid
1 x Mixing Pad, Spatula
Instructions for Use
HY-Bond Polycarboxylate Cement
-
- Chemically adheres to tooth structure and cast appliances
- Exhibits high adhesive strength and low solubility
- Radiopaque, easy to mix and manipulate with a very low film thickness
- Can be placed on freshly cut dentin with no pulpal irritation
- Less technique sensitive due to the tannin-fluoride additive -
-
Shofu HY-Bond Zinc Phosphate Cement 1-1 Set 1 x 60g Powder 1 x 40g Liquid
Shofu HY-Bond Zinc Phosphate Cement 1-1 Set 1 x 60g Powder 1 x 40g Liquid
The only zinc phosphate cement that can be applied over freshly cut dentin without causing any pulpal irritation due to the HY-Agent additive which is helps to nullify the harshness of the phosphoric acid. Traditional luting agent for cementation of cast restorations and orthodontic appliances.
Packing:
1 x 60g Powder
1 x 40g Liquid
-
- Offers high compressive strength and good film thickness with adequate radiopacity
- Seals dentinal tubules and minimizes post-operative sensitivity
- Radiopaque
- Less technique sensitive with superior handling
- Minimized solubility to oral fluids -
-
A non-eugenol, polycarboxylate based temporary cement designed for temporary cementation of provisional crowns, fixed restoration and implant prosthesis, indirect pulp capping and temporary sealing of prepared cavities as an intermediate restorative.
Contains the patented HY-Agent additive with tannin-fluoride that seals dentinal tubules to prevent pulpal irritation.
Packing:
1 x 60g Powder
1 x 35g (30ml) Liquid
1 x Mixing Pad, Spatula
Instructions for Use
HY-Bond Temporary Cement (Soft)
-
- Ensures easy removal with sufficient adhesive strength for short-term cementation
- Easy to mix, manipulate and apply
- Fast setting and easy to clean up
- Minimum odour and taste -
-
Shofu HY-Bond Glaslonomer CX-Smart 1-1 Set 1 x 45g Powder 1 x 25ml Liquid
Shofu HY-Bond Glaslonomer CX-Smart 1-1 Set 1 x 45g Powder 1 x 25ml Liquid
HY-Bond GlasIonomer CX-Smart is a truly biocompatible contemporary luting glass ionomer that guarantees reliable cementation for lasting restorations. Both the glass and liquid polymer components in the CX-Smart formulation have been modified to enhance the working and handling properties for an easier, cleaner application.
Packing:
1 x 45g Powder
1 x 25ml Liquid
1 x Mixing Pad, Spatula
Instructions for Use
HY-Bond GlasIonomer CX Smart
-
Based on Shofu’s proven track record in self-adhesive luting technology, HY-Bond CX-Smart comprises of SHOFU’S proprietary additive- HY-agent, “a tannic acid-strontium fluoride-zinc fluoride complex” that is known to promote mineralization, increase acid resistance and reduce solubility with anti-bacterial and anti-enzymatic properties while virtually eliminating hypersensitivity.
- Chemically bonds to the tooth structure for excellent marginal seal and sharp set with remarkable moisture tolerance.
- No etch or bond for a quick, easy and simple application– ideal for paediatric, geriatric and special needs patients.
- Resin-free, suitable for patients with resin allergy.
- Optimal thixotropicity and even film thickness with durable physical properties, high acid resistance and low oral solubility.
- HY-additive ensures virtually no post-operative sensitivity & favourable pulp response.
- Cost-effective and efficient.
Zirconomer Improved defines a new class of restorative that promises the strength and durability of amalgam with the protective benefits of glass ionomer while completely eliminating the hazard of mercury. This high strength restorative has been specially reinforced with nano-zirconia fillers that not only impart remarkable mechanical properties to the restoration for posterior load bearing areas but also provides enough translucency to match natural tooth. Combination of outstanding strength, durability and sustained fluoride protection deems it ideal for permanent posterior restoration in patients with high caries incidence as well as cases where strong structural cores and bases are essential.
Packing:
1 x12 gm Powder
1 x 5 ml Liquid
Mixing Pad
Spoon & Spatula
-
- High strength and durability like Silver amalgam with protective benefits of glasionomer
- Improved edge strength and marginal adaptation
- High translucency, flexural modulus and compressive strength
- Improved mixing and handling characteristics
- Excellent resistance to abrasion and erosion
- Remarkable radiopacity
- Sustained high fluoride release for anti-cariogenic benefits especially in cases with high caries risk
- Exceptional for minimally invasive procedures as it chemically bonds to enamel and dentin while displaying tooth-like co-efficient of thermal expansion, which results in low interfacial stresses and minimizes potential for failure
- Packable and condensable like amalgam without the hazard of mercury or the risk of corrosion, expansion and thermal conductivity -
-
A radio-opaque glass ionomer luting material is now available in capsules for a simple, fast and predictable application.
Brochures Instructions for Use
Packing:
Zirconomer P 1-1 Set (PN C0040)(Powder 12g & Liquid 5ml)
Zirconomer P
Zirconomer P
-
- Zirconomer P features a robust architecture that strengthens and reinforces tooth structure while providing a secure marginal seal for strong and durable posterior restorations.
- The self-adhesive restorative material eliminates the risk of polymerization shrinkage and facilitates a stable chemical bond to natural dentin and enamel without any interfacial stresses for greater longevity, minimal post-op sensitivity and optimal dimensional stability.
- Zirconomer P saves clinical time as no priming, bonding or extensive tooth preparation are needed. All you need to restore defects, is mix, bulk-fill cavities and finish at one go, while preserving healthy tooth structure.
- The biocompatible, monomer and mercury free, amalgam alternative is safe for patients of all ages and prevents secondary caries by providing a fluoride-rich milieu. Suitable for standard and high caries risk cases, Zirconomer P ensures predictability with total peace of mind. -
-
A newly formulated radiopaque, Resin Modified Glass Ionomer (RMGI) Cement for luting metal-ceramic, full metal and metal-free crowns, bridges, inlays and onlays as well as orthodontic brackets.
Packing:
Powder 15 gm & Liquid 8.6 ml (1103), Mixing Pad
-
- Chemically bonds to tooth structure to ensure higher bonding strength
- Fluoride Release & Biocompatible.
- Low film thickness of just 12μ
- Minimum odour and virtually no post-operative sensitivity
- Improved fracture toughness and low solubility for intra-oral durability of the restoration
- Provides an excellent marginal seal and prevents microleakage
- Exhibits high translucency for aesthetic cases
- Long working time with a net setting time of 4 minutes
- Change of colour from a light pink to colourless upon setting, for ease of identification and application
- Easy to manipulate and remove excess cement -
-
A non-eugenol, polycarboxylate based temporary cement designed for temporary cementation of provisional crowns, fixed restoration and implant prosthesis, indirect pulp capping and temporary sealing of prepared cavities as an intermediate restorative.
Contains the patented HY-Agent additive with tannin-fluoride that seals dentinal tubules to prevent pulpal irritation.
Packing:
1 x 125g Powder
1 x 70g Liquid
1 x Mixing Pad, Spatula
Instructions for Use
HY-Bond Temporary Cement (Soft)
-
- Ensures easy removal with sufficient adhesive strength for short-term cementation
- Easy to mix, manipulate and apply
- Fast setting and easy to clean up
- Minimum odour and taste -
-
GlasIonomer FX Ultra is a highly translucent, self-adhesive and durable glass ionomer, developed to meet the daily restorative needs of patients across the entire age spectrum, with the convenience of capsule delivery.
Brochures Instructions for Use
Packing:
Available in a box of 50 capsules (each capsules weighs 0.61 gm)
GlasIonomer FX Ultra Capsule
GlasIonomer FX Ultra Capsule
-
- Excellent aesthetics with high translucency for better shade match
- Superior mechanical properties for durable & lasting restorations
- Time efficient with optimal working time & quick set at intra-oral temperature
- Convenience of capsule delivery with one-step, capsule activation for fast and easy mix.
- Optimal fluoride release and recharge that protects and reinforces tooth structure
- Stable & reliable with low acid erosion and solubility
- Comes in Shades: A2, A3, A3.5 -
-
GlasIonomer FX Ultra capsule features a novel “high-trans fluoroaluminosilicate glass (HT glass)” with “dual surface treatment” and “anti-cluster molecule”, that reacts homogeneously with “high performance polycarboxylic acid co-polymer”, to facilitate optimal working time, a rapid increase in translucency and sharp set of the self-cure restorative glass ionomer.
Packing:
1 Set
Brochures
GlasIonomer FX Ultra
-
-Translucent & Aesthetic: Developed with “HT” glass that imparts the highest level of translucency for better aesthetics and easier shade match
-Strong & Durable: Special “high-performance polycarboxylic acid co-polymer” fosters strong ionic bonds with multivalent ions to ensure strong, stable and durable restorations. -
-