Packing:
2 x 9g Automix Syringes
15 x Mix-Tips
15 x Standard Intraoral Tips
10 x Extra-Fine Intraoral Tips
-
Advanced Formula, Dual-Cure CompCore™ AF
Provides exceptional performance and the enhanced light-curing properties save considerable time. If light-curing is not an option – allow CompCore™ AF to self-cure in 4.5 minutes intraorally!
Improved natural appearance
The greater translucency of the enhanced CompCore AF presents a more natural tooth appearance which minimizes the chance of shadows under ceramic crowns- yet provides good contrast and excellent radiopacity.
Outstanding handling for ease of use
CompCore AF Stack will stay put – even in difficult maxillary core build-ups, yet flows under pressure for excellent adaptation. Preps like dentin without ditching.
Superior durability for peace of mind
CompCore AF dental composite core build-up material utilizes exclusive Hyperbranched Technology™1 and nano-fillers for superior mechanical properties and long term clinical success – available in automix SyringeMix™ and cartridge dispensers.
-
compcore_charts_2019-967x500.jpg
-
Bonding Agent
(use only bonding agents compatible with dual-cure composites, such as IntegraBond™)
1. Clean and dry prepared tooth surface.
2. Apply 37% phosphoric acid to the cavo surface for 10 to 15 seconds.
3. Rinse and dry cavo surface, do not desiccate the tooth.
4. Apply first coat of IntegraBond™ on prepared cavo surface. Allow to sit for 15 seconds, and then air dry.
Apply 2 to 3 more coats; without waiting, dry again after last application.
5. Light-cure for 20 seconds
Core Build-Up
1. Bleed syringe. Assemble intraoral tip to mix-tip, attach to syringe and bleed tip.
2. Place intraoral tip into the base of the prepared tooth and dispense. Let material rise around the tip while withdrawing to eliminate air bubbles.
3.Light-cure for 30 seconds. If the core is larger than 8mm, light-cure for at least an additional 10 seconds.*
Check for complete hardness. The preparation can be finished immediately. Alternately, the core can be chemical-cured, final set-time is 4.5 minutes.
Coat-It is a light-cured self-adhesive resin coat designed to provide a strong and protective seal on the surface of Glass Ionomers, provisionals and direct resins for enhanced mechanical properties, durability and aesthetics of the restoration.
Packing:
Coat It 6ml
50 x Disposable Brush Fine (Pink)
25 x V-Dish
-
- Remarkably natural surface gloss with just 10 seconds of cure
- High degree of surface cure with minimal residual monomer
- Seals, protects and strengthens surface of glass ionomers, provisional restoration and direct resins
- Remarkable wear and stain resistance for restorations that remain stable over time
- Exceptionally strong and durable bond to various substrates- to enamel, dentin, glass ionomer and resins with virtually no gap -
-
All it takes is a thin layer of Coat-It (LED / Halogen) to significantly decrease the surface roughness on the Glass Ionomer restoration and boost its strength.
Specially designed buff disk made of synthetic felt polishing cloth on the outer surface to retain the polishing paste with a plastic snap-on mount for mandrels.
Felt disk to be used with DirectDia Paste to super-polish natural enamel, composite, porcelain or gold restorations.
Packing:
25/Pack
-
- Felt disk retains polishing paste with minimum splatter or wastage during use
- Requires feather light touch to produce a high gloss polish
- Flexible yet resilient disks easily adapt to natural contours of tooth surface
- Absence of metal center or exposed mandrel prevents gouging or discoloration of tooth/restoration
- Disposable disks comply with infection control protocol
- Available in 2 sizes: 12 mm and 8 mm
Bio mouldable saliva ejector with tongue holder.
Packing:
100/Pack
-
Green PE is a fossil-free, bio-based polyethylene made from sugar canes. Unlike conventional PE where fossil raw materials such as oil and natural gas are used, sugar cane is a completely renewable resource. Hygoformic is the original, mouldable saliva ejector with tongue holder. Used by dentists all over the world for more than 50 years.
Now also available in eco-friendly Green PE. Single use.
By using Green PE, bio-based polyethylene, Orsing reduces the level of carbon dioxide in the atmosphere. We help saving our planet for future generations. Dental manufacturers can also make a difference to reduce global warming. As a leading manufacturer of saliva ejectors and aspirator tubes, Orsing considers environmental sustainability to be of great importance. -
Autoclavable
Colour: White with green stripes
Length: 140 mm.
Manufactured in PP -
A tiny blue autoclavable tip that turns the Hygosurge and Hygosurge XL into a unique suction device for micro oral surgery and fine endodontic work.
Packing:
25/Pack
-
-
Autoclavable
Apex: 1,7 mm
Colour: Light blue
Manufactured in PP -
Luxator Periotomes are specially designed with fine tapering blades that compress the alveolar bone, cut the membrane and gently ease the tooth from its socket. The Luxator Titanium Periotome offers enhanced durability and extractions are performed with a minimum of tissue damage. The titanium coating lowers the friction with 43% compared with stainless steel, making it easier to glide into the socket. The new durable titanium coated tip does not require sharpening.
Packing:
Each
-
4 reasons to use Luxator® Titanium Periotome
1. Stays sharp
2. Low friction
3. Ergonomic design
4. Wide range of sizes and shapes
-
Autoclavable Fixus 1 case included.
-
Luxator Periotomes are specially designed with fine tapering blades that compress the alveolar bone, cut the membrane and gently ease the tooth from its socket. The Luxator Titanium Periotome offers enhanced durability and extractions are performed with a minimum of tissue damage. The titanium coating lowers the friction with 43% compared with stainless steel, making it easier to glide into the socket. The new durable titanium coated tip does not require sharpening.
Packing:
Each
-
4 reasons to use Luxator® Titanium Periotome
1. Stays sharp
2. Low friction
3. Ergonomic design
4. Wide range of sizes and shapes
-
Autoclavable Fixus 1 case included.
-
Crafted using state of the art technology, Speedster burs are made from a solid piece of sub-micron grain premium carbide. MultiAxial precision grinding processes implement carefully designed angulations, flute depths, rake angles, and blading for optimal geometry and cutting performance.
Product Brochure
Packing:
5/Pack
Diatech Speedstar
-
- Outstanding cutting efficiency reduces preparation and chair time
- Consistent blade contact with tooth surface for smoother cutting
- Reduced vibration and chatter
- Less damage to the tooth structure
- High wear resistance
- High durability -
-
Recommended Speed Range: 30,000-60,000 rpm
Crafted using state of the art technology, Speedster burs are made from a solid piece of sub-micron grain premium carbide. MultiAxial precision grinding processes implement carefully designed angulations, flute depths, rake angles, and blading for optimal geometry and cutting performance.
Product Brochure
Packing:
5/Pack
Diatech Speedstar
-
- Outstanding cutting efficiency reduces preparation and chair time
- Consistent blade contact with tooth surface for smoother cutting
- Reduced vibration and chatter
- Less damage to the tooth structure
- High wear resistance
- High durability -
-
Recommended Speed Range: 30,000-60,000 rpm
- Cylindrical post with flat head is ideal for the treatment of slim or of multi-rooted teeth
- X-Shape retention pattern including cement venting for superior mechanical grip
- Available in Titanium alloy (Ti6AL4V) and stainless steel › Seven sizes all compatible with ParaPost Drills
Packing:
10/Pack
-
Benefits
Complete Endodontic Post System For All Indications
- State-of-the-art universal endodontic post system for all direct and casting techniques
- Standardized system with up to seven sizes
- Non-end cutting depth-calibrated drills for precise canal preparation
- Two- or three-fluted drills available
Patented X-Shape Retention Pattern Provides
- Resistance to rotation
- Superior tensile retention
- Excellent cement venting
- Parallel sides distribute functional stress equally along the entire length of the post
Special Manufacturing Technique Provides
- Increased resistance to oblique forces
- Chamfered for ease of insertion during cementation -
-
- Cylindrical post with flat head is ideal for the treatment of slim or of multi-rooted teeth
- X-Shape retention pattern including cement venting for superior mechanical grip
- Available in Titanium alloy (Ti6AL4V) and stainless steel › Seven sizes all compatible with ParaPost Drills
Packing:
10/Pack
-
Benefits
Complete Endodontic Post System For All Indications
- State-of-the-art universal endodontic post system for all direct and casting techniques
- Standardized system with up to seven sizes
- Non-end cutting depth-calibrated drills for precise canal preparation
- Two- or three-fluted drills available
Patented X-Shape Retention Pattern Provides
- Resistance to rotation
- Superior tensile retention
- Excellent cement venting
- Parallel sides distribute functional stress equally along the entire length of the post
Special Manufacturing Technique Provides
- Increased resistance to oblique forces
- Chamfered for ease of insertion during cementation -
-