所有產品

Glass-ionomer restorative that features high water resistance. Chemically bonds to tooth structure. Surface hardness produces a stain-free, long-lasting finish. Fluoride-releasing and radiopaque.

Packing:
Each

• Product Features
• Specifications
• Usage Instruction

• Additives: Fluoride Releasing
  
  Item Type: Powder / Liquid
  
  Packaging Type: 1:1 Package
  
  Radiopaque: Radiopaque
  
  Shade: 22 Yellow Brown

Icon Vestibular Caries Infiltrant is used to treat white spots in vestibular areas. 

Packing:
2 Treatment units each including:
1 x Syringe @ 0,45 ml Icon-Etch
1 x Syringe @ 0,45 ml Icon-Dry
1 x Syringe @ 0,45 ml Icon-Infiltrant
6 x Vestibular-Tips
1 x Luer-Lock-Tip

Instructions for use
Icon

Safety datasheets
Icon Infiltrant

• Product Features
• Specifications
• Usage Instruction

• - Gentle method for counteracting cariogenic white spots – with an esthetic side effect
  - No unnecessary loss of healthy hard tissue
  - User-friendly and patient-friendly application process in only one sitting
  
  Tips from the practice
  
  
  1. Re-etching »older« inactive white spots
  
  - You can etch multiple times if there is a very thick pseudo-intact surface layer
  - If the white discoloration disappears within a few seconds when ethanol (Icon-Dry) is applied, then it is sufficiently etched
  - If the opaque discoloration remains, then the etching process should be repeated
  - Up to three etching steps for two minutes per lesion are possible
  
  2. Before/after documentation
  
  - Optimize your patient communication process by taking before and after pictures
  - These photos give your patients definitive proof about the success of the treatment
  
  3. Fluorosis and other white spots
  
  - Even non-cariogenic enamel changes can be treated with Icon.
  - Experiences in practice show: Patients with fluorosis can be successfully treated, where it has proved useful to repeat the etching steps multiple times. Awaiting confirmation from clinical studies
  - Enamel changes caused by trauma have been successfully treated. Awaiting confirmation from clinical studies
  
  
• 
  
• 
  

Icon Proximal Caries Infiltrant fills the gap between fluoridating and drilling. 

Packing:
2 Treatment units each including:
1 x Syringe @ 0.3 ml Icon-Etch
1 x Syringe @ 0.45 ml Icon-Dry
1 x Syringe @ 0.45 ml Icon-Infiltrant
6 x Approximal-Tips
1 x Luer-Lock-Tip
4 x Dental wedges

Instructions for use
Icon

Safety datasheets
Icon Infiltrant

• Product Features
• Specifications
• Usage Instruction

• - Tooth friendly filling by infiltration – no drilling needed
  - Gentle therapy approach for difficult-toreach proximal lesions in just a few steps
  - No unnecessary loss of healthy hard tissue
  - Prolongs the life expectancy of the tooth
  
  Tips from the practice
  
  
  1. Exact diagnosis with bitewing x-rays
  
  - Make use of bitewing x-rays for early diagnosis of proximal lesions
  
  - Check the necessity of x-ray images in advance, for example through the use of fiber-optic transillumination devices
  
  - A helpful accessory for these x-rays is the DMG Icon X-ray Holder System. It makes it possible to take multiple images in the same reproducible position, even over several sessions, and therefore simplifies the diagnosis and evaluation of the therapy’s success
  
  2. Gentle tooth separation step by step
  
  - It is best to proceed slowly with the tooth separation, a bit like stretching out a muscle. The tissue has to respond to the increase in pressure
  
  - Guide the wedge into the interdental space until resistance is felt. The patient will experience this as a light pressure
  
  - Hold the wedge in position for several seconds
  
  - Softly push the wedge further until the widest part of the wedge creates enough separation between the teeth
  
  3. Documentation in patient records
  
  - Icon is not radiopaque
  
  - This is because certain filler materials are necessary to make it radiopaque. These materials negatively affect the infiltrant’s flow properties and therefore its penetrative ability
  
  - In order to document the procedure properly, the patient card included in every package should be marked and filed appropriately
  
  The answer to white spots? I can Icon
  
  
  
• 
  
• 
  

Icon smooth surface is used to treat white spots in vestibular areas.

Packing:
1 x Syringe @ 0,45 ml Icon-Etch
1 x Syringe @ 0,45 ml Icon-Dry
1 x Syringe @ 0,45 ml Icon-Infiltrant
6 x Vestibular-Tips
1 x Luer-Lock-Tip

Brochure
Icon Vestibular

Instructions for use
Icon Vestibular

Safety datasheets
Icon Vestibular

• Product Features
• Specifications
• Usage Instruction

• - Gentle method for counteracting cariogenic white spots – with an esthetic side effect
  - No unnecessary loss of healthy hard tissue
  - User-friendly and patient-friendly application process in only one sitting
  
  Tips from the practice
  
  
  1. Re-etching »older« inactive white spots
  
  - You can etch multiple times if there is a very thick pseudo-intact surface layer
  - If the white discoloration disappears within a few seconds when ethanol (Icon-Dry) is applied, then it is sufficiently etched
  - If the opaque discoloration remains, then the etching process should be repeated
  - Up to three etching steps for two minutes per lesion are possible
  
  2. Before/after documentation
  
  - Optimize your patient communication process by taking before and after pictures
  - These photos give your patients definitive proof about the success of the treatment
  
  3. Fluorosis and other white spots
  
  - Even non-cariogenic enamel changes can be treated with Icon.
  - Experiences in practice show: Patients with fluorosis can be successfully treated, where it has proved useful to repeat the etching steps multiple times. Awaiting confirmation from clinical studies
  - Enamel changes caused by trauma have been successfully treated. Awaiting confirmation from clinical studies

Icon smooth surface is used to treat white spots in vestibular areas.

Packing:
7 Treatment units each including:
1 x Syringe @ 0,45 ml Icon-Etch
1 x Syringe @ 0,45 ml Icon-Dry
1 x Syringe @ 0,45 ml Icon-Infiltrant
6 x Vestibular-Tips
1 x Luer-Lock-Tip

Instructions for use
Icon

Safety datasheets
Icon Infiltrant

• Product Features
• Specifications
• Usage Instruction

• - Gentle method for counteracting cariogenic white spots – with an esthetic side effect
  - No unnecessary loss of healthy hard tissue
  - User-friendly and patient-friendly application process in only one sitting
  
  Tips from the practice
  
  
  1. Re-etching »older« inactive white spots
  
  - You can etch multiple times if there is a very thick pseudo-intact surface layer
  - If the white discoloration disappears within a few seconds when ethanol (Icon-Dry) is applied, then it is sufficiently etched
  - If the opaque discoloration remains, then the etching process should be repeated
  - Up to three etching steps for two minutes per lesion are possible
  
  2. Before/after documentation
  
  - Optimize your patient communication process by taking before and after pictures
  - These photos give your patients definitive proof about the success of the treatment
  
  3. Fluorosis and other white spots
  
  - Even non-cariogenic enamel changes can be treated with Icon.
  - Experiences in practice show: Patients with fluorosis can be successfully treated, where it has proved useful to repeat the etching steps multiple times. Awaiting confirmation from clinical studies
  - Enamel changes caused by trauma have been successfully treated. Awaiting confirmation from clinical studies
  

Icon fills the gap between fluoridating and drilling.

Packing:
1 x Syringe @ 0.3 ml Icon-Etch
1 x Syringe @ 0.45 ml Icon-Dry
1 x Syringe @ 0.45 ml Icon-Infiltrant
6 x Approximal-Tips
1 x Luer-Lock-Tip
4 x Dental wedges

Brochure
Icon Proximal

Instructions for use
Icon Proximal

Safety datasheets
Icon Proximal

• Product Features
• Specifications
• Usage Instruction

• - Tooth friendly filling by infiltration
  - No drilling needed
  - Gentle therapy approach for difficult
  - Toreach proximal lesions in just a few steps
  - No unnecessary loss of healthy hard tissue
  - Prolongs the life expectancy of the tooth
  
  Tips from the practice
  
  
  1. Exact diagnosis with bitewing x-rays
  
  - Make use of bitewing x-rays for early diagnosis of proximal lesions
  
  - Check the necessity of x-ray images in advance, for example through the use of fiber-optic transillumination devices
  
  - A helpful accessory for these x-rays is the DMG Icon X-ray Holder System. It makes it possible to take multiple images in the same reproducible position, even over several sessions, and therefore simplifies the diagnosis and evaluation of the therapy’s success
  
  2. Gentle tooth separation step by step
  
  - It is best to proceed slowly with the tooth separation, a bit like stretching out a muscle. The tissue has to respond to the increase in pressure
  
  - Guide the wedge into the interdental space until resistance is felt. The patient will experience this as a light pressure
  
  - Hold the wedge in position for several seconds
  
  - Softly push the wedge further until the widest part of the wedge creates enough separation between the teeth
  
  3. Documentation in patient records
  
  - Icon is not radiopaque
  
  - This is because certain filler materials are necessary to make it radiopaque. These materials negatively affect the infiltrant’s flow properties and therefore its penetrative ability
  
  - In order to document the procedure properly, the patient card included in every package should be marked and filed appropriately
  
  The answer to white spots? I can Icon
  
  
  
  

Icon fills the gap between fluoridating and drilling.

Packing:
7 Treatment units each including :
1 x Syringe @ 0.3 ml Icon-Etch
1 x Syringe @ 0.45 ml Icon-Dry
1 x Syringe @ 0.45 ml Icon-Infiltrant
6 x Approximal-Tips
1 x Luer-Lock-Tip
4 x Dental wedges

Instructions for use
Icon

Safety datasheets
Icon Infiltrant

• Product Features
• Specifications
• Usage Instruction

• - Tooth friendly filling by infiltration – no drilling needed
  - Gentle therapy approach for difficult-toreach proximal lesions in just a few steps
  - No unnecessary loss of healthy hard tissue
  - Prolongs the life expectancy of the tooth
  
  Tips from the practice
  
  
  1. Exact diagnosis with bitewing x-rays
  
  - Make use of bitewing x-rays for early diagnosis of proximal lesions
  
  - Check the necessity of x-ray images in advance, for example through the use of fiber-optic transillumination devices
  
  - A helpful accessory for these x-rays is the DMG Icon X-ray Holder System. It makes it possible to take multiple images in the same reproducible position, even over several sessions, and therefore simplifies the diagnosis and evaluation of the therapy’s success
  
  2. Gentle tooth separation step by step
  
  - It is best to proceed slowly with the tooth separation, a bit like stretching out a muscle. The tissue has to respond to the increase in pressure
  
  - Guide the wedge into the interdental space until resistance is felt. The patient will experience this as a light pressure
  
  - Hold the wedge in position for several seconds
  
  - Softly push the wedge further until the widest part of the wedge creates enough separation between the teeth
  
  3. Documentation in patient records
  
  - Icon is not radiopaque
  
  - This is because certain filler materials are necessary to make it radiopaque. These materials negatively affect the infiltrant’s flow properties and therefore its penetrative ability
  
  - In order to document the procedure properly, the patient card included in every package should be marked and filed appropriately
  
  The answer to white spots? I can Icon
  
  
  
  

Ionosit-Baseliner is the »stress breaker« among the dental materials. This light curing active baseliner is the ideal one-component underfilling material for composite restorations.
Its active chemistry compensates for the shrinkage typical with composite fillings, prevents marginal gap formations, and, with that, minimizes postoperative sensitivities, microfractures and secondary caries.
The material is radiopaque, provides fluoride release, and, due to its zinc content, has antibacterial properties.

Ionosit-Baseliner – for stress-free restorations.

Packing:
3 x 0.33g Saferinge

Instructions for Use
Ionosit-Baseliner

• Product Features
• Specifications
• Usage Instruction

• - Unique compensation for composite polymerization shrinkage stress
  - Fluoride release
  - Antibacterial properties
  - No complicated handmixing
  - Protects the pulp
  - Seals the dentine tubules
  - Prevents postoperative sensitivities
  - Radio-opaque

Ionosit-Baseliner is the »stress breaker« among the dental materials. This light curing active baseliner is the ideal one-component underfilling material for composite restorations.
Its active chemistry compensates for the shrinkage typical with composite fillings, prevents marginal gap formations, and, with that, minimizes postoperative sensitivities, microfractures and secondary caries.
The material is radiopaque, provides fluoride release, and, due to its zinc content, has antibacterial properties.

Ionosit-Baseliner – for stress-free restorations.

Packing:
2 x 1.5g Syringes

Instructions for Use
Ionosit-Baseliner

• Product Features
• Specifications
• Usage Instruction

• - Unique compensation for composite polymerization shrinkage stress
  - Fluoride release
  - Antibacterial properties
  - No complicated handmixing
  - Protects the pulp
  - Seals the dentine tubules
  - Prevents postoperative sensitivities
  - Radio-opaque

Ionosit-Baseliner is the »stress breaker« among the dental materials. This light curing active baseliner is the ideal one-component underfilling material for composite restorations.
Its active chemistry compensates for the shrinkage typical with composite fillings, prevents marginal gap formations, and, with that, minimizes postoperative sensitivities, microfractures and secondary caries.
The material is radiopaque, provides fluoride release, and, due to its zinc content, has antibacterial properties.

Ionosit-Baseliner – for stress-free restorations.

Packing:
20 x 0.33g Saferinge

Instructions for Use
Ionosit-Baseliner

• Product Features
• Specifications
• Usage Instruction

• - Unique compensation for composite polymerization shrinkage stress
  - Fluoride release
  - Antibacterial properties
  - No complicated handmixing
  - Protects the pulp
  - Seals the dentine tubules
  - Prevents postoperative sensitivities
  - Radio-opaque

This convenient paste-liquid formula in our unique Clicker™ Dispenser offers the protection of a conventional glass ionomer liner without the mess of measuring.

Packing:
1 x 10g Clicker Dispenser
1 x Large Mixing Pad
1 x Technique Card

• Product Features
• Specifications
• Usage Instruction

• - Faster, easier dispensing and the right mix every time
  - Conventional paste-liquid formula offers the protection of a conventional glass ionomer liner without the mess of measuring
  - Award-winning Clicker dispenser assures a consistent mix
  - Helps protect against post-op sensitivity: offers a strong bond to dentin, sealing the tooth structure to protect against microleakage
  - Low microleakage comparable to original Vitrebond™ Liner/Base
  - Fluoride release of a true glass ionomer
  - Excellent handling characteristics for easy placement.
  - Cures in 20 seconds - a faster cure time than powder-liquid formulas
  - Delivers excellent adhesion with any dental adhesive system
  - Radiopaque
  - No additional hardware required
• Cure Type: Light Cure
  
  Delivery System: Clicker™ Dispenser
  

The applier securely holds the mixed Aplicap capsule and is used to deliver the material directly to the tooth or preparation. Includes one Aplicap applier.

Packing:
Each

• Product Features
• Specifications
• Usage Instruction

• - Easy delivery of Aplicap capsule material to the tooth preparation or to the restoration
  - Easy to use
  - For application of the ready-mixed capsule contents
• 
  
•